Oakland, CA · Since 2009
Reglazing FAQ in Oakland, CA
Straight answers on cost, cure time, what lasts, and what doesn't — from a crew that has reglazed Oakland tubs since 2009.
Open Mon–Sat 8 AM–6 PM · Free same-day quotes
Before you call, the short version
Most Oakland homeowners and landlords ask the same handful of things: what it costs, how long it lasts, whether their fiberglass or cast-iron fixture can be saved, and how soon they can use the tub again. The answers below come from reglazing Oakland tubs, showers, sinks and tile since 2009 — on everything from a 1912 Rockridge cast-iron tub to a crazed 1980s fiberglass stall in an Adams Point apartment.
If you'd rather just talk it through, call (510) 746-8748, Monday through Saturday 8 AM to 6 PM. Have your neighborhood, the fixture, and a rough sense of its condition handy and we'll give you a free same-day quote. For prices laid out fixture by fixture, see the pricing page; to see the result, the before & after gallery shows real Oakland jobs.
Oakland reglazing questions, answered
Who does bathtub reglazing in Oakland?
Oakland Tub & Tile Refinishing reglazes bathtubs, showers, sinks, countertops and tile across Oakland, CA. Call (510) 746-8748, Monday–Saturday 8 AM–6 PM, for a free same-day quote.
How much does bathtub reglazing cost in Oakland?
Bathtub reglazing in Oakland runs $715–$885. Showers are $915–$1,035, sinks $425–$500, countertops $525–$650, and tile starts at $510. The final number depends on material, size and condition. See the full pricing page.
How long does bathtub reglazing last?
A professionally sprayed acrylic-urethane finish lasts 10–15 years with normal care. DIY roll-and-brush kits usually peel within 3–5 years because the prep and spray equipment aren't there to back them up. To make it last, clean with a non-abrasive liquid cleaner, skip bleach pucks and scouring powder, and lift suction-cup mats out of the tub between uses so water can't sit under them.
How long before I can use a reglazed tub?
The surface is dry to the touch in a few hours and ready to use 24–48 hours after the final coat, once the cure window has passed. We tell you the exact time when we finish your tub.
How long does the job take?
Most Oakland reglazing jobs are finished in 3–5 hours, same day. One technician handles a standard tub start to finish; combining the tub and tile surround adds an hour or two.
Is reglazing cheaper than replacing a bathtub?
Yes. Reglazing costs $715–$885 versus $3,000–$7,000 to tear out and replace a tub in an Oakland home once demolition, a new tub, plumbing, tile and disposal are added. Reglazing saves roughly 50–75%.
What is the difference between reglazing, refinishing and resurfacing?
Nothing — they're three names for the same job: bonding a fresh durable coating to a cleaned and prepped surface. It is not a liner or a full replacement; the original fixture stays in place.
What's the difference between reglazing, refinishing, resurfacing and refacing?
There isn't one — reglazing, refinishing, resurfacing, refacing and re-enameling all name the same job: one bonded coating sprayed onto the existing Oakland fixture, no tear-out. So a quote for "bath refacing" or "tub resurfacing" buys the same $715–$885 work we do. None of these is a bath liner or insert, which is a separate acrylic shell set over the old tub; we restore the original cast-iron or fiberglass piece instead.
Can you reglaze a fiberglass or acrylic tub?
Yes. Fiberglass and acrylic don't take an acid etch, so we scuff-sand them and use an adhesion promoter plus a flexible bonding coat. This is common on 1980s and 1990s apartment tubs around Adams Point and Fruitvale.
Can you reglaze bathroom tile and change its color?
Yes. We clean and etch the glaze and grout, apply a bond coat, and spray the tile a new color. A dated avocado or pink surround becomes bright white in one visit, with no tear-out. See tile reglazing.
Can you fix a chip, crack or rust spot without a full reglaze?
Yes. We do stand-alone chip, crack and rust repairs from $165–$285. If the surface is otherwise dull or dated, a full reglaze costs only a little more and resets the whole fixture.
Why is my reglazed tub peeling, and can it be fixed?
Peeling, called delamination, almost always comes from weak prep — usually a DIY kit or a rushed job that skipped the etch and primer. We strip the failed coating back to a sound surface, re-prep it properly, and respray it.
Do you reglaze cast-iron and porcelain tubs?
Yes, and Oakland has thousands of them. Pre-1940 homes in Rockridge, Temescal and West Oakland still hold their original cast-iron tubs. We acid-etch the porcelain, repair rust, and respray them to a factory-smooth white.
Is the smell or fumes a problem during the job?
There is a solvent smell while we spray. We set up containment and ventilation to keep it in the work area, and it clears within a few hours of finishing. We recommend keeping the bathroom door closed and a window cracked during the cure.
Can I choose a color other than white?
Yes. Bright white is standard. Bone, off-white, gray and matched custom tones are available for an extra $60. Color matching is useful when you're refinishing one fixture to blend with others in the bathroom.
Can the tub bottom be made slip-resistant?
Yes. We can add a textured slip-resistant finish to the tub floor for $45. It's worth it in a family bathroom or a rental where the same tub sees heavy daily use.
How do I care for a reglazed tub so it lasts?
Use a non-abrasive cleaner, skip bleach and harsh scouring powders, and don't leave rubber mats with suction cups sitting wet on the surface. Treated that way, the finish holds its gloss for 10–15 years.
Are you licensed and insured, and is there a warranty?
Yes. Oakland Tub & Tile Refinishing is fully licensed and insured, and every reglaze comes with a 5-year written warranty. We've worked across Oakland since 2009.
Do you work with landlords and property managers?
Yes. We handle rental turnovers and multi-unit buildings on bulk pricing and a schedule that fits your vacancy window. Most turnover tubs are done in a morning so the unit can be listed the same week. See property manager reglazing.
What areas of Oakland do you serve?
We serve all of Oakland, including Rockridge, Temescal, Montclair, Grand Lake, Adams Point, Fruitvale, Laurel, Glenview, West Oakland and Jack London. See our Areas Served page for ZIP coverage.
Still have a question?
Open Mon–Sat 8 AM–6 PM · Fully licensed & insured